Tests

CBR Test

The CBR (California Bearing Ratio) test is used to evaluate the relative strength and bearing capacity of a soil by measuring its resistance to penetration...

Permeability Test

It is also known as hydraulic conductivity test. It is used to determine the permeability or the ability of soil to transmit water via pores....

Consolidation Test

Consolidation refers to process by which soil undergo deformation and settlement under applied loads over time. This deformation is due to rearrangement of soil particles...

Unconfined Compression Test

Unconfined compression Strength test or UCS test, is used to determine the unconfined compressive strength of a cohesive soil such as clay. Unconfined compressive strength...

Tri-axial test

A tri-axial test is one of the common methods to measure the mechanical properties of soil and rocks under different stress conditions. It is one...

Direct shear test

The direct shear test, also known as shear box test, is used to determine the shear strength parameters of a soil sample and evaluate the...

ConcreteTest

a. Cube/Cylinder Crushing Test The cube or cylinder crushing test is a common laboratory test conducted on concrete samples to assess their compressive strength. It...

Soil Tests

1) Hydrometer Analysis Hydrometer analysis is a laboratory test conducted to determine the particle size distribution of a soil sample. It is particularly useful in...

UTM Tensile Strength Test

The UTM (Universal Testing Machine) is commonly used to perform tensile strength tests on various materials. The tensile strength test measures the maximum amount of...

Sand Tests

1) Sieve Analysis Sieve analysis is a laboratory test conducted to determine the particle size distribution of a granular material, such as soil, sand, gravel,...

Aggregate Test

1) Sieve Analysis Sieve analysis for aggregate is a widely used test to determine the particle size distribution of coarse and fine aggregates. It provides...

Cement Test

Cement testing involves various tests conducted on cement samples to assess their quality, strength, and suitability for use in construction applications. Here are some common...

Brick Tests

Brick tests are conducted to evaluate the quality, strength, and other properties of bricks used in construction. These tests help ensure that the bricks meet...

Calibration Tests

Calibration tests are performed to verify and adjust the accuracy of measuring instruments or equipment used in various fields, including engineering, manufacturing, scientific research, and...

Sampling Techniques

Sampling refers to the process of collecting representative specimens of soil from a site or location for laboratory testing, analysis, or other purposes. The sampling...

Zinc Coating Test

Zinc coating test refers to various methods used to evaluate the quality and effectiveness of zinc coatings applied to metal surfaces. Zinc coating, often in...

Concrete Coring Test

When it comes to concrete core testing, there are three crucial steps involved: finishing, capping, and testing. Here's a brief description of each step: Finishing:...

Timber Test

Timber testing refers to the evaluation and assessment of various properties and characteristics of timber or wood materials. These tests are conducted to determine the...

Tests for Teliya Tiles

Tiles are flat, thin, and usually square or rectangular pieces made from various materials such as ceramic, porcelain, glass, natural stone, or concrete. They are...